The special two-fluid ultrasonic nozzle made of stainless steel is not only resistant to high pressure and corrosion, but also has a long service life, and because of the specially designed front-mounted adjustable bullet-shaped ultrasonic resonator, it can effectively increase the spray quality and make the water mist particles smaller and easier to mix with Air combined. It also allows good atomization effects to be obtained under a wide range of gas/liquid pressure difference ratios. The front-mounted adjustable bullet-shaped ultrasonic resonator can easily adjust the distance between the nozzle outlet and the resonator, because it can easily adjust the spray diffusion range (radian) and atomization quality, so that the required humidification distance is higher than other non-adjustable Much shorter.

When the resonance adjuster is adjusted too close to the nozzle, the atomized water mist will be sprayed backwards, which will hit the nozzle body and cause poor dew condensation.

Adjust the resonance adjuster to the appropriate position, and the water mist will spread out in a planar shape. At this time, the atomization effect is the best and the contact area with the air is large, and there is no dripping.

When the distance between the resonance adjuster and the nozzle outlet is relatively large, the water mist will be sprayed forward, and the atomized particles will be relatively large.

B: Resonance adjustment ring

R: resonant amplifier

D: distance

V: Hexagon socket screw for adjustment (Ф2.5)